Canon Pro9500 Mark II Series On-Screen Manual page 5

Safety Precautions
Do not transport or use the printer on a slant, vertically or
upside-down, as the ink may leak and damage the printer.
Print Heads Keep ink tanks out of the reach of children.
and ink tanks
In case ink is accidentally licked or swallowed, rinse out mouth or give
one or two glasses of water to drink.
If irritation or discomfort occurs, obtain medical advice immediately.
In case ink gets in contact with eyes, rinse with water
immediately.
In case ink gets in contact with skin, wash with soap and
water immediately.
If irritation to eyes or skin persists, obtain medical advice immediately.
Do not shake Print Heads or ink tanks.
Ink may leak out and stain clothing or the surrounding area.
Do not throw ink tanks into fire.
Do not attempt to disassemble or modify the Print Head and
ink tanks.
Do not handle the Print Head and ink tanks roughly such as
applying them excessive pressure or dropping them.
Once you have installed the Print Head and ink tanks, do not
remove them unnecessarily.
Note when you place the printer near other electrical appliances such as fluorescent lamps
Place the printer at least 5.91 inches / 15 cm away from other electrical appliances such as
fluorescent lamps. If the printer is placed closer to those, it may not be able to work properly due to
fluorescent noises.
When you disconnect the power plug
When you disconnect the power plug, always press the Power button and be sure that the Power
lamp (in blue) has gone out. If you disconnect the power plug from the power outlet when the Power
lamp lights or flashes, the Print Head cannot be protected and you may not be able to print later.
Never touch the electrical contacts on
a Print Head after printing.
The metal parts may be very hot and could
cause burns.
Do not rinse or wipe the Print Head
and ink tanks.
Page 5 of 541 pages
Page top