Canon Pro9500 Mark II Series On-Screen Manual page 8

Main Components
(8) Front Tray
Printed paper ejects here. Open it before printing.
Load paper in the Front Tray to print on large size paper, such as 14" x 17" / 36 x 43 cm paper, or on thick
paper.
See Loading Paper in the Front Tray
(9) Front Tray Extension
Pull out to support paper. Pull it out before printing.
(10) Power button
Press to turn the power on or off.
Important
Disconnecting the power plug
When disconnecting the power plug after turning off the power, be sure to confirm that
the Power lamp is not lit. If the power plug is disconnected from the wall outlet while the
Power lamp is lit or flashing, the printer may become unable to print properly since the
Print Head is not protected.
Note
When the power is turned on, the printer may start mixing the ink to maintain ink quality (for
about 10 seconds to 3 minutes).
Maintaining Ink Quality
See
Auto power off feature
You can set the printer to turn off automatically when no print data is sent for a certain
interval.
Specify this setting in the Maintenance sheet of the printer driver setup window
(Windows) or in the Canon IJ Printer Utility (Macintosh).
For details on the settings, refer to the on-screen manual:
(11) Power lamp
Lights blue after flashing when the power is turned on.
(12)
RESUME/CANCEL button
Press to cancel a print job in progress. You can press this button after resolving a printer error to dismiss
an error message and resume printing.
(13) Alarm lamp
Lights or flashes orange when an error, such as paper-out or ink-out, occurs.
Note
Power and Alarm lamps
You can check the status of the printer by the
- Power lamp is off: The power is off.
and Media Types You Can Use
.
Power
and
.
Advanced Guide .
lamps.
Alarm
Page 8 of 541 pages