Canon Pro9500 Mark II Series On-Screen Manual page 429

Message Appears on the Computer Screen
Check 2: Make sure that the USB cable is securely plugged in to the printer and
the computer.
If you are using a relay device such as a USB hub, disconnect it, connect the printer
directly to the computer, and try printing again. If printing starts normally, there is a
problem with the relay device. Consult the reseller of the relay device for details.
There could also be a problem with the USB cable. Replace the USB cable and try
printing again.
Check 3: Make sure that your printer's name is selected in the Print dialog box.
Opening the Page Setup and Print Dialog Box (Macintosh)
Error Number: 1281 Is Displayed
Check: Is the Front Tray up when printing from the Rear Tray starts?
Return the Front Tray to its normal printing position, make sure that paper is loaded in the
Rear Tray, then press the
Loading Paper for details about how to return the Front Tray to its normal printing position.
Error Number: 1283 Is Displayed
Check: If the Front Tray is pulled up while printing from the Rear Tray, return the
Front Tray to its normal printing position, then press the RESUME/CANCEL button
on the printer and try printing again.
Refer to
Loading Paper
position.
Do not move the Front Tray during printing.
Error Number: 1284 Is Displayed
Check: If the Front Tray is pulled down while printing from the Front Tray, return
the Front Tray to the Front Paper Feeding Position, then press the
RESUME/CANCEL
Refer to
Loading Paper
position.
Do not move the Front Tray during printing.
Error Number: 1320 Is Displayed
Check: Is the printer ready to feed paper from the Front Tray?
Load the paper correctly in the Front Tray and press the
printer.
Refer to
Loading Paper
Error Number: 1321 Is Displayed
Check: Is the paper loaded correctly in the Front Tray?
Press the RESUME/CANCEL
correctly in the Front Tray according to the procedure described in
printing again.
Message: 1350 Is Displayed
Twelve flashes:
See
action.
RESUME/CANCEL button on the printer to resume printing. Refer to
for details about how to return the Front Tray to its normal printing
button on the printer and try printing again.
for details about how to return the Front Tray to its normal printing
for details about how to load the paper correctly in the Front Tray.
button on the printer to clear the error, and then load the paper
in Alarm Lamp Flashes Orange
RESUME/CANCEL button on the
Loading Paper and try
and take the appropriate
Page 429 of 541 pages