Canon Pro9500 Mark II Series On-Screen Manual page 300

Adjusting Tone
6.
Complete the setup
Click OK on the Main tab.
The color document is converted to grayscale data with adjusted tones. It allows you to print the
color document in monochrome.
Note
If white streaks appear at the top and bottom of the paper when you print black and white photos,
use your application software to set top and bottom margins of at least 45 mm (1.77 inch) in the
print direction, and then print the photo.
Related Topics
Printing a Color Document in Monochrome
Adjusting Brightness
Adjusting Intensity
Adjusting Contrast
Page 300 of 541 pages
Page top