Canon Pro9500 Mark II Series On-Screen Manual page 414

Printing Does Not Start
in the printer?
Press the RESUME/CANCEL
in the Page Setup sheet (Windows) or the Page Setup dialog box (Macintosh) in the printer driver
and load paper that is the same size as the setting and try printing again.
If printing does not start even when the paper loaded in the printer is the same as the setting, set the
printer driver not to detect the width of the paper.
* Select the Detect paper width check box again once printing is complete, and then click Send.
The Custom Settings in the Maintenance sheet, clear the Detect paper width check box, and then
click Send.
In the Canon IJ Printer Utility, select Custom Settings in the pop-up menu, clear the Detect paper
width check box, and then click Send.
The settings here are also applied under Direct Printing from a digital camera.
Check 10: Are the Media Type and the Page Size settings of the printer
driver correct?
When using Art Paper or non Canon genuine specialty paper, be sure to select the type of each
media from Media Type and a paper size which says "Art XX (Margin 35)" from Paper size.
Confirm the settings following the procedure below, and try printing again.
1.
If the page size you want to use is not displayed, open the File menu of the
application and select Print. Then make sure that the name of your printer is
selected.
2.
Make sure that the paper selected for Media Type in the Main sheet (Windows)
or the Print dialog box (Macintosh) in the printer driver matches the paper loaded
in the printer.
3.
Make sure that the Page Size setting in the Page Setup sheet (Windows) or the
Paper size setting in the Page Setup dialog box (Macintosh) in the printer driver
is the same as the size set in step 1.
Check 11: Make sure that your printer's name is selected in the Print
dialog box.
The printer will not print properly if you are using a driver for a different printer.
In Windows, make sure that your printer's name is selected in the Print dialog box.
In Macintosh, make sure that your printer's name is selected in Printer in the Print dialog box.
Note
To make the printer the one selected by default, select Set as Default Printer (Windows),
Default Printer or Make Default (Macintosh).
Check 12: Configure the printer port appropriately.
Configure "USBnnn" (where "n" is a number) as the printer port.
1.
Log on as a user account with administrator privilege.
2.
Click Control Panel, then Printer under Hardware and Sound.
In Windows XP, click Control Panel, Printers and Other Hardware, then Printers and Faxes.
In Windows 2000, click Control Panel then Printers.
3.
Right-click the Canon XXX icon, then select Properties.
button on the printer to clear the error. Then check the Page Size setting
Page 414 of 541 pages