Switch Back Roller Assy - Brother DCP-8070D Service Manual

9.8.67 Switch Back Roller ASSY

(1) Remove the cup B M3x10 Taptite screw, and remove the Gear 34 from the ADF chute
ASSY.
(2) Release the Hook of the LF roller gear 27N2 to remove the LF roller gear 27N2, and
remove the Bushing 6.
(3) Remove the Conductive bushing N from the ADF chute ASSY, and remove the LF roller
3 ASSY from the ADF chute ASSY.
Conductive bushing N
Assembling Note:
• When assembling the Switch back roller ASSY, assemble the Conductive bushing N with
aligning the Boss of the Conductive bushing N with the notch on the ADF chute ASSY.
Switch back roller ASSY
3
Gear 34
Fig. 5-139
ADF chute ASSY
Boss
Conductive bushing N
Fig. 5-140
5-126
Bushing 6
LF roller gear 27N2
2
Hook
ADF chute ASSY
1
Taptite cup B M3x10
Confidential