Brother DCP-8070D Service Manual page 256

(7) With the "2.ACTIVITY," "3.DOCUMENTS," "4.COM.LIST (NEW)," or "5.COM.LIST
(ERR3)" being displayed, press the [OK] button.
The "ENTER NO. &SET" appears.
(8) Enter the telephone number of the receiver machine and press the [OK] button again.
Note:
• Be sure to type the telephone number with the numerical keys. No one-touch
dialing is allowed in this procedure.
The machine displays the "ACCEPTED" for approx. two seconds and starts dialing to
transfer data.
The machine automatically returns to the stand by state.
No station ID will be attached. A cover page and end page as shown on the next page
will be automatically attached, instead.
Cover page sample
End page sample
Job number
Total number of page to be transferred
Station ID registered in the sender equipment
FAX number of the sender equipment
Telephone number of the sender equipment
Transfer start date
Model code
Boot ROM info
ROM info
Serial number
Job number
Total number of pages transferred
Station ID registered in the sender equipment
FAX number of the sender equipment
Telephone number of the sender equipment
Error codes
5-3
Confidential