Brother DCP-8070D Service Manual page 636

• Selectors 5 and 6 / 7 and 8:Selection of judging function for scanning pages
These selectors set the condition to control scanning pages compensation. Some
operation losses occur in the control of the compensation. If you want to start scanning
immediately even if the image quality is not good, set to "01: Not discriminates". If you want
to give priority to the image quality even though losses are increased, select one of others
("00: Discriminates depending on the rate of change" or "10: Discriminates every page").
<WSW63> (Function setting 25)
Selector No.
1
Not used
2
3 Clock type
4
Demo print type
I
(Demo language)
7
8 Font support for Israel
• Selector 3: Clock type
Setting this selector to "1"displays Japanese clock type (YMD). If this selector sets to "0",
select USA type (MDY) or European type (DMY) by WSW17 selector 5.
• Selector 4: Demo print type (Demo language)
This selector specifies the language for Demo print.
• Selector 8: Font support for Israel
To enable the font support for Israel, set this selector to "1".
compensation
Function
0 : Follow to WSW17
1 : Japanese Type (YMD)
0000 : Other
0001 : English
0010 : USA
0011 : CANADA
0100 : JAPANESE
0101 : EU1
0110 : EU2
0111 : EU3
1000 : EU4
1001-1111 : Reserved
0: Disable
App. 1-59
Setting and Specifications
1: Enable
Confidential