Brother DCP-8070D Service Manual page 43

(CIS model)
Print speed is up to 28 or 30 ppm for A4 and Letter size when loading A4 or Letter size paper
from the paper tray in the plain paper mode.
Actual print speed varies depending on the media type or paper size as shown in the tables
below;
<A4/Letter size>
Media type setting
Plain paper, Recycled paper
Plain paper thin
Thick paper, Envelope, Envelope thin, Label
Thicker paper, Bond paper, Envelope thick
<Smaller size than A4 or Letter>
Media type setting
Plain paper, Recycled paper
Plain paper thin
Thick paper, Envelopes, Envelopes thin,
Label, HAGAKI
Thicker paper, Bond paper, Envelope thick
Specifications are subject to change without notice.
Note :
• The print speed may vary according to conditions, such as paper size and paper
tray.
• When a smaller size paper than A4 or Letter is printed, the temperature on both
edges of the fuser unit is much higher than the temperature on the center of the unit
where the paper is fed depending on the setting or model. Therefore, the print
speed is slowed in order to decrease the temperature on the edges after the
specified time, it is maximum print speed when you first start printing.
• The actual print speed varies depending on the paper size.
Print speed
DCP8070D MFC8370DN MFC8380DN
A4: 28 ppm
Letter: 30 ppm
A4: 28 ppm
Letter: 30 ppm
A4: 15 ppm
Letter: 16 ppm
3 ppm
Print speed
DCP8070D MFC8370DN MFC8380DN
0 to 90 second 30 ppm,
90 second or later 15 ppm
A4: 28 ppm
Letter: 30 ppm
0 to 9 second 16 ppm,
9 second or later 15 ppm
3 ppm
1-29
A4: 30 ppm
Confidential