Brother DCP-8070D Service Manual page 209

■ CIS model
Note:
• In the case of the assembling and disassembling of the
refer to 4-3 to 4-29.
< Uninstalling Procedure >
Check that the following before entering the procedures.
• Make sure that the AC cord is disconnected from the machine.
• Make sure that the Drum/toner ASSY is removed.
• Make sure that the Paper is removed from the Paper tray.
(1) Open the Back cover.
(2) Remove the Arms of the Back cover from the Pins.
Pin
Arm
Fig. 4-45
4-30
CCD model,
Arm
Back cover
Pin
Confidential