Cis Model; Driver Pcb - Brother DCP-8070D Service Manual

■ CIS model

Note:
• In the case of the

9.14.2 Driver PCB

(1) Disconnect the Connector of the Driver harness from the Main PCB.
Driver harness
Main PCB
(2) Remove the two cup S M3x6SR Taptite screws, and remove the Driver PCB from the
Driver PCB holder.
(3) Disconnect the Connector of the Driver harness from the Driver PCB.
Driver PCB
Driver harness
Taptite cup S M3x6SR
CCD model, refer to "9.14.1 Driver
Driver PCB
<Left side>
Fig. 5-194
<Left side>
Fig. 5-195
PCB".
Driver PCB
holder
5-167
Main PCB
Confidential