Brother DCP-8070D Service Manual page 99

Error Message
Replace Parts It is time to replace the
PF Kit 2 or paper feeding kit for Tray
Replace PF Kit 2 2.
Replace Toner The toner cartridge is used
up and printing is not
possible.
Scan Unable XX The machine has a
mechanical problem.
Document is too long for
duplex scanning.
Scanner Locked The scanner lock is locked. Open the document cover, and then
Size mismatch The paper in the tray is not
the correct size.
Toner Low If the LCD shows Toner
Low, you can still print;
however, the machine is
telling you that the toner
cartridge is near the end of
its life.
Too Many Files There are too many files
stored on the USB Flash
memory drive.
Too Many Trays More than one optional
tray is installed.
Unusable Device An incompatible or broken
device has been
connected to the USB
direct interface.
Type of Error
Replace the PF Kit 2.
Replace the toner cartridge with a
new one.
Perform processing with the error
code.
Press Stop/Exit. Use the suitable
size of paper for duplex scanning.
release the scanner lock lever.
Press Stop/Exit.
Load the correct size of paper in the
tray and set the "Paper Size".
Order a new toner cartridge now.
Reduce the number of files stored on
the USB Flash memory drive.
The maximum number of optional
trays is one. Remove any additional
trays.
Remove the USB Flash memory
drive from the USB direct interface.
3-8
Action
Confidential
Refer
to
3-15
3-17
-
3-32
3-23
3-17
-
-
3-36
3-40