Pressure Roller - Brother DCP-8070D Service Manual

9.8.37 Pressure Roller

(1) Turn the Document cover upside down. Remove the two cup B M3x10 Taptite screws.
(2) Remove the Rear sensor cover from the Document cover.
Taptite cup B M3x10
Document cover
(3) Remove the two cup B M3x10 Taptite screws, and then remove the two LF springs, four
Pressure rollers and two Pressure roller shafts S.
Pressure roller shaft S
Taptite cup B M3x10
Fig. 5-96
Pressure rollers
LF spring
Fig. 5-97
Taptite cup B M3x10
Rear sensor cover
Pressure rollers
Pressure roller shaft S
LF spring
Taptite cup B M3x10
5-94
Document cover
Confidential