Roller Holder Assy - Brother DCP-8070D Service Manual

9.46 Roller Holder ASSY

(1) Push the Lift arm to the direction of 1a and pull out the pin of the Roller holder ASSY.
Then, turn the Roller holder ASSY to the direction of 1b.
(2) Slide the Roller holder ASSY to the direction of 2a. Then, lift up the gear side of the
Roller holder ASSY to the direction of 2b and pull it out to the direction of 2c to remove.
Assembling Note:
• When assembling the roller holder ASSY, align the section "A" on the shaft of the roller
holder ASSY with the hole on the paper feed frame.
Lift arm
Paper feed frame
Pin
Roller holder ASSY
Paper feed frame
1b
1a
Fig. 5-283
Roller holder ASSY
2c
2b
Fig. 5-284
5-224
"A"
2a
Confidential