Cis Model; Joint Cover Assy - Brother DCP-8070D Service Manual

■ CIS model

Note:
• In the case of the

9.18.2 Joint Cover ASSY

(1) Disconnect the connector of the USB HOST harness ASSY from the Main PCB.
Main PCB
USB HOST harness ASSY
(2) Remove the four bind B M4x12 Taptite screws from the Joint cover ASSY.
(3) Release all Hooks of the Joint cover and lift up the front side of the Joint cover ASSY.
(4) Pull out the Joint cover ASSY's Bosses to the front side.
Bosses
<Left side>
Taptite bind B M4x12
CCD model, refer to "9.18.1 Joint Cover
Fig. 5-203
4
Hooks
Fig. 5-204
ASSY".
Joint cover ASSY
3
Hooks
5-175
Main PCB
Taptite bind B M4x12
Hooks
<Front side>
Taptite bind B M4x12
Confidential