Brother DCP-8070D Service Manual page 456

(5) Remove the two bind B M4x12 Taptite screws, and then remove the LV insulation sheet.
(6) Remove the bind B M4x12 Taptite screw, and then remove the SW holder ASSY.
(7) Float the Fan motor 60 unit LV from the Frame R.
Note:
• Do not remove the Fan motor 60 unit LV at the above step.
SW holder ASSY
Taptite, bind B M4x12
Fig. 5-248
Taptite, bind B M4x12
Fig. 5-249
5-203
LV insulation sheet
Frame R
<Right side>
Fan motor 60 unit LV
Confidential