Pulley Assy; Home Position Sensor - Brother DCP-8070D Service Manual

9.10.7 Pulley ASSY

(1) Remove the two B M3x6 Taptite screws, and then remove the Pulley ASSY.
(2) Remove the Pulley spring.
<Back side>

9.10.8 Home Position Sensor

(1) Release the Hooks and remove the Home position sensor.
(2) Disconnect the Connector of the Home position sensor harness from the Home position
sensor.
(Home position sensor harness)
Home position sensor
Taptite B M3x6
Pulley spring
Connector
Hook
<Back side>
Pulley ASSY
1
2
Fig. 5-159
2
1
Fig. 5-160
5-138
Hook
Confidential