Table of Contents
Advertisement
44
en | Installing a Pipe Mount
7
Installing a Pipe Mount
7.1
Description
This chapter details how to mount the HD Conference Dome to
a pipe. The HD Conference Dome is also suitable for surface
(Section 4 Installing a Surface Mount, page 22), wall
(Section 5 Installing a Wall Mount, page 28), and recess
mounting (Section 6 Installing a Recessed Mount, page 35). For
specific directions on mounting the unit, see the manual that
came with your mount.
NOTICE!
The image sensors in modern cameras are highly sensitive and
require special care for proper performance and extended
lifetime. Follow the guidelines for optimum results with your
camera:
–
–
7.1.1
Tools/Supplies Required
–
–
–
–
F.01U.265.806 | 1.0 | 2012.03
Do not expose to direct sunlight or bright spotlights in
operating and nonoperating conditions.
Avoid bright lights in the field of view of the camera. Bright
lights cause a "smearing" effect, which is visible as white
lines above and below the highlight. Prolonged exposure to
bright lights may cause bleaching of the sensor's color
filters. This will be visible as colored spots in the picture
and is irreversible.
Appropriate straight slot screwdrivers
No. 2 Phillips screwdriver
Appropriate tool for cutting a hole in drywall or ceiling tile
(if applicable)
T-10 Torx wrench
Installation Manual
HD Conference Dome
Bosch Security Systems, Inc.
Advertisement
Table of Contents
