Advanced Mode: Service; Maintenance - Bosch VCD Series Installation Manual

HD Conference Dome
the activation key to release the function on the Licenses page
(see Section 12.55 Licenses, page 149).
12.53

Advanced Mode: Service

12.54

Maintenance

Firmware
The HD Conference Dome is designed in such a way that its
functions and parameters can be updated with firmware. To do
this, transfer the current firmware package to the unit via the
selected network. It will then be automatically installed there.
In this way, an HD Conference Dome can be serviced and
updated remotely without a technician having to change the
installation on site.
Refer to Section 16 BVIP Firmware Updates, page 154, for
firmware upgrade instructions.
CAUTION!
Before launching the firmware upload make sure that you have
selected the correct upload file. Uploading the wrong files can
result in the unit no longer being addressable, in which case
you must replace the unit.
You should never interrupt the installation of firmware. An
interruption can lead to the flash-EPROM being incorrectly
programmed. This in turn can result in the unit no longer being
addressable, in which case it will have to be replaced. Even
changing to another page or closing the browser window leads
to an interruption.
Refer to Section 16 BVIP Firmware Updates, page 154, for
firmware upgrade instructions.
Bosch Security Systems, Inc.
Configuring the HD Conference Dome | en 147
Installation Manual F.01U.265.806 | 1.0 | 2012.03