Alarm E-Mail - Bosch VCD Series Installation Manual

132 en | Configuring the HD Conference Dome
Threshold
Set up the threshold on the basis of the signal visible in the
graphic. You can set the threshold using the slide control or,
alternatively, you can move the white line directly in the graphic
using the mouse.
Sensitivity
You can use this setting to adapt the sensitivity to the sound
environment. You can effectively suppress individual signal
peaks. A high value represents a high level of sensitivity.
Signal Ranges
You can exclude particular signal ranges in order to avoid false
alarms. For this reason the total signal is divided into 13 tonal
ranges (mel scale). Check or uncheck the boxes below the
graphic to include or exclude individual ranges.
12.41

Alarm E-Mail

As an alternative to automatic connecting, alarm states can also
be documented by e-mail. In this way it is possible to notify a
recipient who does not have a video receiver. In this case, the
HD Conference Dome automatically sends an e-mail to a
previously defined e-mail address.
Send alarm e-mail
Select On if you want the unit to automatically send an alarm e-
mail in the event of an alarm.
Mail server IP address
Enter the IP address of a mail server that operates on the SMTP
standard (Simple Mail Transfer Protocol). Outgoing e-mails are
sent to the mail server via the address you entered. Otherwise
leave the box blank (0.0.0.0).
SMTP user name
Enter a registered user name for the chosen mailserver here.
SMTP password
Enter the required password for the registered user name here.
F.01U.265.806 | 1.0 | 2012.03 Installation Manual
HD Conference Dome
Bosch Security Systems, Inc.