Bosch VCD Series Installation Manual page 106

106 en | Configuring the HD Conference Dome
Max. Gain Level
Controls the maximum value the gain can have during AGC
operation. To set the maximum gain level, choose from:
–
–
–
Sharpness
Adjusts the sharpness of the picture. To set the sharpness, type
a value between 1 and 15 inclusive. The default setting is 12.
Shutter Mode
–
–
Shutter
Adjusts the electronic shutter speed (AES). Controls the time
period for which light is gathered by the collecting device. The
default setting is 1x (60 Hz: 1/30, 50 Hz: 1/25).
Auto SensUp Maximum
Sets the Auto SensUp minimum value for the HD Conference
Dome. The Auto SensUp Min. value is the factor by which the
sensitivity of the camera is increased. The default setting is 15x.
Backlight Compensation
Optimizes the video level for the selected area of the image.
Parts outside this area may be underexposed or overexposed.
Select On to optimize the video level for the central area of the
image. The default setting is Off.
Stabilization
Turns on video stabilization.
F.01U.265.806 | 1.0 | 2012.03
Normal
Medium
High
Off: turns the Auto SensUP Off.
AutoSensUp: increases camera sensitivity by increasing
the integration time on the CCD. This is accomplished by
integrating the signal from a number of consecutive video
frames to reduce signal noise.
If you select this option, the HD Conference Dome makes
the following change automatically:
– Auto Iris: switches to Constant
Installation Manual
HD Conference Dome
Bosch Security Systems, Inc.