Bosch VCD Series Installation Manual page 148

148 en | Configuring the HD Conference Dome
Configuration
You can save configuration data for the HD Conference Dome
on a computer and then load saved configuration data from a
computer to the unit.
Upload
1.
2.
3.
Once the upload is complete, the new configuration is
activated. The time remaining is shown by the message going to
reset Reconnecting in ... seconds. The unit reboots
automatically once the upload has successfully completed.
Download
1.
2.
SSL certificate
To be able to work with an SSL encrypted data connection,
both ends of a connection must hold the relevant certificates.
You can upload the SSL certificate, comprising one or multiple
files, onto the HD Conference Dome.
If you wish to upload multiple files onto the HD Conference
Dome, you must select them consecutively.
1.
2.
3.
The new SSL certificate is valid.
F.01U.265.806 | 1.0 | 2012.03
Enter the full path of the file to upload or click Browse to
select the required file.
Make certain that the file to be loaded comes from the
same unit type as the unit you want to configure.
Next, click Upload to begin transferring the file to the unit.
The progress bar allows you to monitor the transfer.
Click the Download button. A dialog box opens.
Follow the on-screen instructions to save the current
settings.
Enter the full path of the file to upload or click Browse to
select the required file.
Next, click Upload to begin transferring the file to the unit.
Once all files have been successfully uploaded, the unit
must be rebooted. In the address bar of your browser,
enter /reset after the IP address of the HD Conference
Dome (for example 192.168.0.10/reset).
Installation Manual
HD Conference Dome
Bosch Security Systems, Inc.