Bosch VC7D1305T Installation Instructions Manual
Bosch VC7D1305T Installation Instructions Manual

Bosch VC7D1305T Installation Instructions Manual

Installation instructions

Advertisement

VCM7D130/00T & VC7D1305T | Installation Instructions

IMPORTANT SAFEGUARDS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Install in accordance with the manufacturerís instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused
for long periods of time.
12. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
13. To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
14. The apparatus shall not be exposed to dripping or splashing.
15. Do not install this equipment in a confined space such as a
bookcase or similar unit.
Bosch Security Systems | 2003-08 | Version 2
EN | 1
Installation Instructions
ENGLISH
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VC7D1305T and is the answer not in the manual?

Questions and answers

Summary of Contents for Bosch VC7D1305T

  • Page 1: Important Safeguards

    14. The apparatus shall not be exposed to dripping or splashing. 15. Do not install this equipment in a confined space such as a bookcase or similar unit. Bosch Security Systems | 2003-08 | Version 2...
  • Page 2: Fcc Information

    Consult the dealer or an experienced radio/ TV technician for help. ATTENTION: INSTALLATION SHOULD BE PERFORMED BY QUALIFIED SERVICE PERSONNEL ONLY IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE OR APPLICABLE LOCAL CODES. Bosch Security Systems | 2003-08 | Version 2...
  • Page 3 1. INTRODUCTION This Dome camera is designed for use with Bosch Color Observation Systems only. It combines a high sensitivity sensor with advanced digital signal processing, resulting in a high quality Dome camera with excellent performance even under difficult circumstances.
  • Page 4 This is done automatically when the mains power is switched on (rear switch). Pull Dome cover to remove Mounting screws 120º Horz; 120º Vertical; Use a screwdriver to 360º Rotation release clip Fig. 1 Bosch Security Systems | 2003-08 | Version 2...
  • Page 5: Mounting The Unit

    10. Adjust the viewing direction of the ball camera (3) and ensure that the picture display on the monitor is level. 11. Click the tinted dome in place and if necessary clean its surface with a soft cloth. Bosch Security Systems | 2003-08 | Version 2...
  • Page 6: Field Of View

    Bright lights may cause bleaching of the sensor's color filters. This will be visible as colored spots in the picture and is irreversible. Field of view The figure below shows the Field of view Bosch Security Systems | 2003-08 | Version 2...
  • Page 7: System Cable

    Pay attention that the connectors are fixed to the cable corresponding to the figure. CAUTION: The plugs used for the observation system have the same dimensions as standard telephone plugs. Never connect a telephone to the Dome camera or system monitor. Bosch Security Systems | 2003-08 | Version 2...
  • Page 8: Tips For Maintenance

    Dome camera at large distances (up to 300m). Electro Magnetic Compatibility (EMC) This equipment complies with the European EMC directive used standards: EN50130-4, EN55022 USA standard: FCC part 15, class B Australia AS/NZS 3548 Bosch Security Systems | 2003-08 | Version 2...
  • Page 9: Environmental Conditions

    Observation System Monitor at a length of 15 meters. By using an interface box for every camera the cable length can be up to 200 meters. If you have any problems, contact your dealer. Bosch Security Systems | 2003-08 | Version 2...

This manual is also suitable for:

Vcm7d130/00t

Table of Contents