Table of Contents
Advertisement
90
en | Configuring the HD Conference Dome
Device time zone
Select the time zone in which your system is located.
Daylight saving time
The internal clock can switch automatically between normal
and daylight saving time (DST). The unit already contains the
data for DST switch-overs up to the year 2018. You can use
these data or create alternative time saving data if required.
NOTICE!
If you do not create a table, there will be no automatic
switching. When changing and clearing individual entries,
remember that two entries are usually related to each other and
dependent on one another (switching to summer time and back
to normal time).
1.
2.
3.
4.
5.
6.
7.
8.
9.
Time server IP address
The HD Conference Dome can receive the time signal from a
time server using various time server protocols, and then use it
F.01U.265.806 | 1.0 | 2012.03
First check whether the correct time zone is selected. If it
is not correct, select the appropriate time zone for the
system, and click the Set button.
Click the Details button. A new window will open and you
will see the empty table.
Select the region or the city that is closest to the system's
location from the list field below the table.
Click the Generate button to generate data from the
database in the unit and enter it into the table.
Make changes by clicking an entry in the table. The entry is
selected.
Clicking the Delete button will remove the entry from the
table.
Select other values from the list fields below the table to
change the entry. Changes are made immediately.
If there are empty lines at the bottom of the table, for
example after deletions, you can add new data by marking
the row and selecting required values from the list fields.
Now click the OK button to save and activate the table.
Installation Manual
HD Conference Dome
Bosch Security Systems, Inc.
Advertisement
Table of Contents
