Bosch VCD Series Installation Manual page 25

HD Conference Dome
5.
6.
7.
8.
Bosch Security Systems, Inc.
Unlock the single safety locking screw on the base of the
unit using the user-supplied Allen wrench.
Figure 4.4 Unlock Safety Locking Screw
Plug the matching connectors from the camera into the
mating connectors from the ceiling.
Figure 4.5 Connect Cables
1 Locking Screw
2 Vertical Tab
3 Mounting Plate
Align wires on side of mounting plate with crescent shaped
cut-out.
Attach the camera to the mounting plate by inserting the
vertical tab on the plate (item 1, below) into the recessed
slot on the top of the camera dome (Item 3) to the right of
the safety locking screw (item 2).
Installation Manual
Installing a Surface Mount | en
F.01U.265.806 | 1.0 | 2012.03
25