Tadiran Telecom SLT User Manual page 63

Freedom (IRSS)
Placing Freedom calls
• For Freedom calls placed from phones that send Caller ID, the Freedom feature must be enabled at your Coral station.
See steps below.
• For Freedom calls placed from phones that do not send Caller ID information, the Freedom feature must be enabled
using the Executive Privilege feature. See
To place a call from a Freedom phone providing Caller ID:
1. Place a call to your Coral station.
2. Listen for a distinctive dial tone.
3. Dial your four-digit passcode (if required by Class of Service).
4. Listen for dial tone.
5. Dial the required destination number.
Possible destinations include: external number (stationary or cellular), network number, or a Coral destination,
including station, trunk/trunk group, dial service, routing access, public/private library, or voice mail.
Notes: 1) If your destination is an external number, it should be preceded by an external line access code.
2) If your destination is voice mail (IVR access code), skip to
3) If your destination is a FlexiCall All feature, skip to
4) To enable another Freedom phone, skip to
6. Listen for the ringback tone.
7. Wait for an answer.
8. You can activate any of the options described in the table on
Freedom (IRSS)
page 59.
page
page 64.
page
58
page 62.
63.
60.
SLT User Guide