Tadiran Telecom SLT User Manual page 112

Speed Dialing Programming Private Libraries
7. Hang up.
8. The private library is now empty and may be reprogrammed when necessary.
The following table defines the special codes which may be used when you have a Touch-Tone Dialing (DTMF) telephone.
These codes are used as part of the outside telephone number.
Codes Description
X X = 1 through 9 seconds delay
#0 Stop dial (end of outside number)
#1 Outpulsing wait period during which user can dial any number of digits
#2 All following digits are Dial Pulse
#3 All following digits are Touch-Tone Dialing (DTMF) tones
#4 Inhibits display (for Call Accounting System)
#5 Enables display (for Call Accounting System)
#6 Wait for second Dial Tone
#8 Display '-' (for Call accounting System)
#9 Calibrated Opening on trunk (Flash)
Dial out
## Dial # out
Speed Dialing
Programming Private Libraries
Touch-Tone Dialing (DTMF) Codes
107 SLT User Guide