Tadiran Telecom SLT User Manual page 36

Call Forward
Internal/External Call Forwarding
In addition to the different call forwarding options, you can set different call forward destinations based on the incoming
call source: external or internal callers, for each forwarding feature (forward all, when busy, on no answer, etc.). The
Internal/External Call Forwarding allows:
• Forwarding internal and external calls to the same destination
• Forwarding internal and external calls to different destinations
• Forwarding internal calls only, while allowing external calls to continue ringing at your station
• Forwarding external calls only, while allowing internal calls to continue ringing at your station
For Example, the Call Forward All feature is used to demonstrate the different possibilities:
Case Call Forward All (#141)
Set To:
1 Feature not set
2 Destination X
3 Feature not set
4 Destination X
5 Destination X
Possible destinations for X are: operator, station/group, external number via public and private speed call library, DVMS pre-
recorded message, UNA/central bell, group call, or network number.
Possible destinations for Y are the same as for X, plus your own station number, thus facilitating forwarding of internal calls to
another destination, while retaining external calls at your own station, as shown in Case 5.
Call Forward
Forward Option
Call Forward External (#17702)
Set To:
and Feature not set
and Feature not set
and Destination Y
and Destination Y
and Destination Y (programmed as
Your own Station)
Resultant Call Destination
Internal Calls Go
To:
Your own Station
Destination X
Your own Station
Destination X
Destination X
31
External Calls Go
To:
Your own Station
Destination X
Destination Y
Destination Y
Your own Station
SLT User Guide