Auto Set Relocate; Permanent - Tadiran Telecom SLT User Manual

Auto Set Relocate: Permanent
When defined for permanent relocation, allows you to swap phones
within the same Coral system by assigning one SLT the profile of the
other SLT, and vice versa. All the phone's properties, numbering,
membership in groups, etc. are automatically exchanged. This feature
facilitates the phone relocation procedure, eliminating the need for
traditional phone moves that involve physical disconnection of the
station wires and reconnection them at another location. Both source
and destination phones (see figure) should be SLTs.
The Auto Set Relocate is activated at the destination station.
The phone swap holds until a reverse swap is performed.
To activate from the destination station:
1. Lift handset and dial Auto Set Relocate feature code.
2. Listen for dial tone.
3. Dial your (source) station number and Listen for dial tone.
4. Dial your (source) passcode (four digits).
5. Listen for dial tone.
6. Dial activation code
7. Hang up. The station initializes with the source profile.
To reverse phone relocation:
Repeat the above procedure from your original source
location.
1. Not applicable for Coral Teleport FXS IP-SLT

Auto Set Relocate

Permanent

1
(no confirmation tone is heard).
Destination
Station
WARNING: See warning on
17
1. Auto Set Relocate activation
from the Destination station
2. Source station's passcode to
be entered
Swapping:
- Dial Number
- SLT Definition
- COS
- Private Library
- Message indication
- Group Membership
page 18.
SLT User Guide
Source
Station
(Passcode)