Tadiran Telecom SLT User Manual page 123

Hookflash
Hookswitch Flash
Flash Hookswitch
Flash Key
Transfer Key
Idle
Intercept
Key Set
Off-hook
On-hook
Operator/Attendant
Outside Line Access
Code
Port
Appendix A - Glossary (cont.)
Appendix A - Glossary (cont.)
The Flashing procedure is a rapid press on the hookswitch. While engaged in a call you
can initiate a feature by flashing the hookswitch. Flashing provides the distinctive dial
tone, which enables you to either transfer the call or activate a feature. In some pulse dial
systems, dialing '1' provides the flash response.
A station or extension that is not ringing or busy, therefore available for use.
If you misdial or dial an unauthorized code (restricted to you), you will receive reorder
tone or will be routed directly to the operator/master extension/attendant, as defined in
your system.
Digital or electronic key telephone set. The key set proprietary telephone is a general
name for the FlexSet, DKT, DST, etc., or any telephone having several buttons, display
unit, loudspeaker, microphone, etc.
Lifting the telephone handset from its cradle. Off-hook provides the dial tone, which then
enables you to dial numbers or activate features.
Replacing (hanging up) the telephone handset on its cradle.
The operator is responsible for answering incoming calls and connecting them to their
required destination. The attendant also attends to trunk, system and station feature
controls.
A series of digits which must be keyed in order to gain access to a trunk or trunk group.
Provides access to a device, station or trunk from within the system.
A-2 SLT User Guide