Tadiran Telecom SLT User Manual page 111

Speed Dialing Programming Private Libraries
To program or change a Coral Private Library Speed Dial number:
1. Lift handset.
2. Dial Private Speed Dial feature code #193.
3. Listen for dial tone.
4. Dial the required Private Library Number 7000-7009.
5. Dial the outside line access code.
6. Dial the outside telephone number (Use special Touch-Tone Dialing DTMF codes. See table on
7. No confirmation tone is heard.
8. Hang up.
Notes: 1) Possible outside line access codes are: trunk number, trunk group number, dial service, routing access or
another public/private library number.
2) The number of digits that can be programmed for an outside telephone number, including dial codes, is limited
by the system (defined system-wide). Trying to enter a longer digit string than allowed, causes a reorder tone
and programming stops.
3) A new number programmed into a utilized private library number replaces the old number.
To delete a Single Coral Private Library:
1. Lift handset.
2. Dial Private Speed Dial feature code #193.
3. Listen for dial tone.
4. Dial the required Private Library number 7000-7009.
5. Dial cancellation code .
6. No confirmation tone is heard.
Speed Dialing
Programming Private Libraries
106
page 107).
SLT User Guide