Wakeup - Tadiran Telecom SLT User Manual

Wakeup

You can program your telephone to call you at a designated time. If you do not answer, you are called three more times, at
one minute intervals, before the feature cancels. In some systems, if you do not answer by the third ring, the wakeup call is
routed to the attendant and a wakeup report is printed.
To enter a Wakeup request:
1. Lift handset.
2. Dial Wakeup feature code #173.
3. Listen for dial tone.
4. Dial activation code
5. Dial in the time you wish to be awoken.
(four digits required [12 hour clock - use leading 0], e.g. 0805 for five past eight).
6. Dial 2 for AM or 7 for PM.
7. Listen for the confirmation tone.
8. Hang up.
Note: Should you hear the reorder tone, Wakeup is denied at your station (as defined by Class of Service ). In order to
make use of this feature you must make a request from the attendant to activate Wakeup at your station.
To answer a Wakeup Call:
When the phone rings at the Wakeup Call time:
1.
2. In some systems you might hear a recorded message.
If you hear music or the distinctive dial tone you can dial Snooze feature code 4 and listen for the confirmation tone.
3. Hang up.
Note: When you activate Snooze, Wakeup recycles and your telephone rings again after a system-wide defined time
period.
Wakeup
. (In some old versions 14.67 or lower, skip this step when the Wakeup time list is empty.)
Lift handset.
112
#173
SLT User Guide