Flash (Calibrated Opening) On Trunk
The Flash feature sends a signal through the system to trunk lines in order to operate certain types of features that are
available on the second system. The second system may be a telephone switching center, PABX, or another Coral system.
In certain countries term "Calibrated Opening" is used in place of "Flash".
Flash can only be activated while connected to an outside line.
To Flash On Trunk:
1. Hookflash.
2. Dial Calibrated Opening feature code #150.
In cases where this is required, specific instructions are given.
Use the following lines to write in the ways in which Flash is used in your company's telephone system:
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
Flash (Calibrated Opening) On Trunk
47
Hookflash #150
SLT User Guide
Need help?
Do you have a question about the SLT and is the answer not in the manual?
Questions and answers