Speaker Installation Options - Panasonic SC-RT30 Operating Instructions Manual

Speaker installation options

Attaching to a wall
You can attach all of the speakers (except subwoofer) to a
wall.
≥ The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 kg per screw. Consult a
qualified building contractor when attaching the speakers
to a wall. Improper attachment may result in damage to the
wall and speakers.
[RT70]
When mounting the front and surround speakers to a wall,
we recommend using a string (not included) to prevent it
from falling (➡ 9).
[RT70] Preparation for the front and surround speakers
1 Removing the speaker cable from the stand.
Release the cable
from the groove.
Stand
2 Attach the cover plate to the speaker.
The speakers are shipped with the cover plate
attached.
Cover plate (➡ 9)
3 Connect the speaker cable. (
1 Drive a screw (not included) into the wall.
‡ 4.0 mm
5.0 to 7.0 mm
Wall or pillar
2 Fit the speaker securely onto the screw(s) with the
hole(s).
e.g. Front and surround
speakers [RT70]
106 mm
340 mm
Screw
Tighten securely.
➡
9)
‡ 7.0 to 9.4 mm
Center speaker
200 mm
Front speaker [RT30]
e.g.
In this position,
the speaker will
likely fall if moved
to the left or right.
[RT70] Reattaching the speaker cable to the stand
1 Remove the eight screws
from the stand, and remove
the speaker net.
2 Position the cable.
Press the cable
into the groove.
Approx.
150 mm
3 Attach the speaker net with the screws.
Fitting speaker stands (not included)
(Except [RT70] Front and surround speakers)
Ensure the stands meet these conditions before purchasing
them.
Note the diameter and length of the screws and the distance
between screws as shown in the diagram.
≥ The stands must be able to support over 10 kg.
≥ The stands must be stable even if the speakers are in a high
position.
e.g. Center speaker [RT30]
Attach the stands to these
metal screw holes.
‡ 5 mm, pitch
0.8 mm
Plate thickness
plus 7 mm to 10
mm
Surround speaker [RT30]
Move the speaker
so that the screw
is in this position.
Screws
Cable
60 mm
Speaker stand
(not included)
RQT8672
17