Speaker Installation Options - Panasonic SC-RT30 Operating Instructions Manual

Refer to the control reference on page 6.
When other Panasonic products respond to this remote
control
When other Panasonic products placed nearby affect this unit's remote
control, change the remote control code on the main unit and the remote
control (the two must match).
Use "DVD 1", the factory set code, under normal circumstances.
To change the code on the main unit
While stopped
1
Press [FUNCTIONS].
Press [, ] to select "To Others" and
2
press [ENTER].
Press [, ] to select "Setup" and press
[ENTER].
Press [, ] to select "Others" and press
[].
Press [, ] to select "Remote Control"
and press [ENTER].
Press [, ] to select the code ("DVD 1",
"DVD 2" or "DVD 3") and press [ENTER].
Setup Remote Control
Press "n" and "ENTER" together
for more than 2 seconds on the remote
Tuning
control.
Disc
Picture
To change the code on the remote control
While pressing [ENTER], press and hold
the numbered button ([1], [2] or [3]) for
more than 2 seconds.
Press [ENTER].
 When the following indicator appears on the unit's display
Press and hold [ENTER] and the indicated
number button at the same time for more
than 2 seconds.
[Note]
Executing "Shipping Condition" in the Setup menu returns the main unit
code to "DVD 1". Change the remote control code to 1 ( step 7).
To return to the previous screen
Press [RETURN].
Matsushita Electric Industrial Co., Ltd.
Web Site: http://panasonic.net
To exit the screen
Press [RETURN] several times.

Speaker installation options

Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
 The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 kg per screw. Consult a qualifi ed building
contractor when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers.
1
Drive a screw (not included) into the wall.
4.0 mm
5.0 to 7.0 mm
Wall or pillar
Fit the speaker securely onto the screw(s) with the
2
hole(s).
Front speaker
e.g.
In this position, the
speaker will likely fall if
moved to the left or right.
Move the speaker so
that the screw is in
this position.
Fitting speaker stands (not included)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between
screws as shown in the diagram.
 The stands must be able to support over 10 kg.
 The stands must be stable even if the speakers are in a high position.
e.g. Center speaker
Attach the stands to these metal screw holes.
5 mm, pitch 0.8 mm
Plate thickness plus
7 mm to 10 mm
7.0 to 9.4 mm
Center speaker
200 mm
Surround speaker
60 mm
Speaker stand (not included)
RQT8729-E
F0406TS0
