Panasonic SC-RT30 Operating Instructions Manual page 8

1
STEP
Included parts to be used
2 Front and 2
Surround speakers
(with cover plate)
Preparation
≥ To prevent damage or scratches, lay down a soft cloth and perform
assembly on it.
≥ For assembly, use Phillips-head and flathead screwdrivers.
≥ Make sure you have all the indicated components before starting assembly,
positioning, and connection.
≥ The front and surround speaker pairs as well as the stand pairs are
different.
–Check the label on the rear of the front speaker before attaching the stand
(➡ right).
–The stand with the shorter cable is for the front speaker.
≥ For optional wall mount, refer to page 17.
1
Attach the stand to the base.
1 Thread the speaker cable through the base.
For quicker threading, loosely fold the cable in half (do not
crease), pass the folded portion through the hole, and then
pull the rest of the cable through the base.
2
Secure the stand to the base.
Screws
Tighten securely.
Screws
Tighten securely.
RQT8672
8
Front and surround speaker assembly [RT70]
4 Stands
≥ 2aStands with short cable: For front speakers
≥ 2aStands with long cable: For surround
speakers
Cable
Base
Stand
Base
4 Bases
Front speakers
2 Attach the stand to the base while gently pulling
on the end of the speaker cable.
Slide the speaker cable into the groove.
16 Screws
Speaker labels
Stand
Base
Cable
Pull gently.