Panasonic SC-RT30 Operating Instructions Manual page 14

STEP 3 Video connections
C Connecting to a television and VCR
Using a fully wired 21-pin Scart lead
≥ You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (➡ 57).
≥ You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
[Required[setting]
"AV1 Output" and "AV2 Input" in the Setup menu (➡ 51)
To the
aerial
RF coaxial lead
(included, grey)
1
RF coaxial lead
(included, black)
2
To copy from a VCR
Refer to "Copying from a video cassette recorder" (➡ 42).
Connecting a terminal other than the 21-pin Scart terminal (➡ 15).
RQT8672
14
Television's rear panel
VHF/UHF
AV
RF IN
RF coaxial lead
(included, black)
3 4
AV1
(TV)
AV2
(EXT)
5
AV OUT
RF
OUT
RF
IN
VCR's rear panel
Fully wired 21-pin Scart lead
(not included)
§ This connection will enable you to play audio
from your television through your home
theater system. Refer to "Enjoying TV
broadcast with this unit's speakers" (➡ 56).
Back of this unit
Fully wired 21-pin Scart lead (For External Link function)
(not included)
Connect the unit directly to the television
Video signals fed
through video
cassette recorders
will be affected by
copyright
protection systems
and the picture will
not be shown
correctly on the
television.
§
(For Q Link functions)
3
Television Television
This unit VCR
This unit
VCR