Using Other Useful Functions; Connecting Other Audio Equipment; Enjoying Tv Broadcast With This Unit's Speakers; Using Headphones - Panasonic SC-RT30 Operating Instructions Manual

Using other useful functions

Preparation
Press [THEATER] to switch the remote control to operate this unit.

Connecting other audio equipment

Back of this unit
OUT
Red White
For
Audio cable
recording
(not included)
Red White
R L
REC IN
Audio output from this unit becomes 2-channel only. Multi-
channel audio is down-mixed (➡ 65).
∫ Recording audio from discs or television
broadcasts to a tape deck
1 Discs: Press [DVD] to select the DVD drive as the source.
Television broadcasts: Press [W X CH] to select the channel.
2 Start recording and play.
Refer to the manual of the other unit for details.
FM/AM broadcasts and audio from the AUX terminal or
MUSIC PORT terminal are not output through the AUDIO
OUT terminals.
∫ To playback audio from a tape deck, etc.,
through this unit's speakers
1 Press [DVD] to select the DVD drive as the source.
2 Press [INPUT] to select "AV3".
3 Start play.
Enjoying TV broadcast with this unit's
speakers
Audio cable (not included)
Red White
1 Press [AUX] to select "AUX" as the source.
2 Turn on the television and select the channel.
3 Adjust the volume on this unit.
RQT8672
≥Set TV volume minimum.
56
WXCH
_ ` VOLUME
Front of this unit
AV3
White Red
For play
Audio cable
(not included)
Red White
Tape
R L
deck
PLAY OUT
White
AUDIO OUT
L
R
Red
Television
3
Back of this unit
You can also enjoy TV broadcasts with this unit's speakers if
you connect the TV to this unit's AV1 terminal (➡ 12–14).
While stopped
1 Press [DVD] to select the DVD drive.
2 Press [INPUT] to select "AV1".
3 Turn on the television and select the channel.
4 Adjust the volume on this unit.
≥Set TV volume minimum.
≥ To listen to the sound from the television, select the
appropriate audio out (e.g. Monitor) on the television.
.

Using headphones

1
Reduce the volume and connect the
headphones (not included).
Headphone plug type: ∅3.5 mm stereo mini plug
2
Adjust headphone volume with [_ j
VOLUME].
Audio output becomes 2-channel only. Multi-channel
audio is down-mixed (➡ 65).
]Note]
≥When headphones are connected, only "Equalizer (EQ)"
can be used to change the sound quality (➡ 48).
≥Avoid listening for prolonged periods of time to prevent hearing
damage.

Using the Music Port

The Music Port allows you to connect and enjoy music from
an external device (e.g. MP3 player) through your home
theater system.
Preparation
To avoid distorted sound, make sure that any equalizer
function of your external device is turned off.
1
Reduce the volume and connect the
external device (not included).
Plug type: ∅3.5 mm stereo mini plug
Audio cable
(not included)
2
Press [MUSIC P.] to select "F MUSICP".
!--------------)
F MUSICP AUX
3
Adjust the external device volume to a
normal listening level, and then adjust
the volume of this unit with [_ j
VOLUME].
]Note]
If the audio is distorted, turn the volume down on the
connected external device.
_ ` VOLUME
_ ` VOLUME
External device
Reduce the volume
before connecting.