Television Operation; When Other Panasonic Products Respond To This Remote Control - Panasonic SC-RT30 Operating Instructions Manual

Television operation

You can operate the TV through the unit's remote control.
Point the remote control at the television
While pressing [Í TV], enter the code
with the numbered buttons.
[0] ➡ [1]
e.g. 01:
Manufacturer and Code No.
Brand Code
Panasonic 01/02/03/
04/45
AIWA 35
AKAI 27/30
BLAUPUNKT 09
BRANDT 10/15
BUSH 05/06
CURTIS 31
DESMET 05/31/33 RADIOLA
DUAL 05/06
ELEMIS 31
FERGUSON 10
GOLDSTAR/LG 31
GOODMANS 05/06/31 SANYO
GRUNDIG 09
HITACHI 22/23/31/
40/41/42
INNO HIT 34
IRRADIO 30
ITT 25
JVC 17/39
LOEWE 07/46
METZ 28/31
MITSUBISHI 06/19/20 THOMSON
MIVAR 24
NEC 36
Test by turning on the television ([Í TV]) and changing
channels ([W X CH]) after pressing [TV].
Repeat the procedure until you find the code that allows
correct operation.
This setting is retained.
Operating the television
1 Press [TV] to switch the remote control to
operate the television.
2 Operate the television by pressing [Í TV] (turn
on/off the television), [INPUT] (input select),
[W X CH] (channel select) or [_ j VOLUME]
(adjust the volume).
≥ When operating this unit, press [THEATER] to switch the
remote control.
≥ If your television brand is not listed or if the code listed for
your television does not allow control of your television, this
remote control is not compatible with your television.
Brand Code
NOKIA 25/26/27
NORDMENDE 10
ORION 37
PHILIPS 05/06
PHONOLA 31/33
PIONEER 38
PYE 05/06
05/06
SABA 10
SALORA 26
SAMSUNG 31/32/43
SANSUI 05/31/33
21
SBR 06
SCHNEIDER 05/06/29/
30/31
SELECO 06/25
SHARP 18
SIEMENS 09
SINUDYNE 05/06/33
SONY 08
TELEFUNKEN 10/11/12/
13/14
10/15/44
TOSHIBA 16
WHITE 05/06
WESTINGHOUSE
When other Panasonic products
respond to this remote control
When other Panasonic products placed nearby affect this
unit's remote control, change the remote control code on this
unit and the remote control (the two must match).
Use "DVD 1", the factory set code, under normal
circumstances.
To change the code on this unit
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4] to select "To Others"
and press [ENTER].
3
Press [3, 4] to select "Setup" and
press [ENTER].
4
Press [3, 4] to select "Others" and
press [1].
5
Press [3, 4] to select "Remote
Control" and press [ENTER].
6
Press [3, 4] to select the code ("DVD
1", "DVD 2" or "DVD 3") and press
[ENTER].
Remote Control
Setup
Press "±" and "ENTER" together
for more than 2 seconds on the remote
Tuning
control.
Disc
Picture
To change the code on the remote control
7
While pressing [ENTER], press and
hold the numbered button ([1], [2] or
[3]) for more than 2 seconds.
8
Press [ENTER].
∫ When the following indicator appears on the
unit's display
e.g. Display
Press and hold [ENTER] and the
indicated number button at the same
time for more than 2 seconds.
[Note]
Executing "Shipping Condition" in the Setup menu returns
this unit code to "DVD 1". Change the remote control code to
1 (➡ step 7).
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
RQT8672
21