Dvd Management; Common Procedures; Providing A Name For A Disc; Setting The Protection - Panasonic SC-RT30 Operating Instructions Manual

DVD management

DVD
3,4,2,1
ENTER

Common procedures

Preparation
≥Press [THEATER] to switch the remote control to operate
this unit.
≥Press [DVD] to select the DVD drive.
≥Insert a disc (➡ 24).
≥
[RAM] Release protection (➡ below).
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4] to select "To Others"
and press [ENTER].
3
Press [3, 4] to select, "DVD
Management" and press [ENTER].
Select which step 4 to perform depending on what you
want to do next.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.

Providing a name for a disc

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
After performing steps 1–3 (➡ above)
4
Press [3, 4] to select "Disc Name"
and press [ENTER].
➡ 43, Entering text
≥The disc name is displayed in the DVD Management
window.
≥
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
name is displayed on the Top Menu.
≥
[+RW]
The disc name is displayed only if you play the
disc on other equipment.
DOCUMENTARY
DVD
MANAGEMENT
Titles: 11
DVD-RAM
Used: 0:22
Disc Name
Disc Protection

Setting the protection

[RAM]
After performing steps 1–3 (➡ above)
4
Press [3, 4] to select "Disc
Protection" and press [ENTER].
5
Press [2, 1] to select "Yes" and
press [ENTER].
DOCUMENTARY
DVD
MANEGEMENT
Titles: 11
DVD-RAM
Used: 0:22
Disc Name
RQT8672 Disc Protection
Delete All Titles
44
THEATER
FUNCTIONS
RETURN
With a finalized disc, the
My favorite
01
Rema
Chapter 1
The lock symbol appears
Remain: 5:38(SP) closed when the disc is
write-protected.
Off
Cartridge-protection
[RAM] (with a cartridge)
With the write-protect tab in the protect
position, play automatically starts when
inserted in the unit.
Deleting all titles and playlists—
Delete all titles
[RAM]
After performing steps 1–3 (➡ left)
4
Press [3, 4] to select "Delete all
titles" and press [ENTER].
5
Press [2, 1] to select "Yes" and
press [ENTER].
6
Press [2, 1] to select "Start" and
press [ENTER].
A message appears when finished.
7
Press [ENTER].
[Note]
≥Once deleted, the recorded contents are lost and
cannot be restored. Make certain before proceeding.
≥Deleting all video titles will result in all playlists also being
deleted.
≥Delete does not work if one or more titles are protected.
Deleting all the contents of a disc—
Format Disc
[RAM] [-RW‹V›] [+RW] [-RW‹VR›]
[+R] [+R]DL] (New disc only)
[Note]
Formatting deletes all contents (including computer
data), and they cannot be restored. Check carefully
before proceeding. The contents are deleted when you
format it even if you have set protection.
After performing steps 1–3 (➡ left)
4
Press [3, 4] to select, "Format Disc"
and press [ENTER].
5
Press [2, 1] to select "Yes" and
press [ENTER].
6
Press [2, 1] to select "Start" and
press [ENTER].
A message appears when formatting is finished.
[Note]
≥Do not disconnect the AC mains lead while
formatting. This can render the disc unusable.
≥Formatting normally takes a few minutes, however it
may take up to a maximum of 70 minutes (
7
Press [ENTER].
[Note]
≥
[-R] [-R]DL] [CD]
Formatting cannot be performed on the disc.
≥
[-RW‹V›] [-RW‹VR›] You can format only as DVD-Video format
on this unit.
≥When a disc has been formatted using this unit, it may not
be possible to use it on any other equipment.
To stop formatting [RAM]
Press [RETURN].
≥You can cancel formatting if it takes more than 2 minutes.
The disc must be reformatted if you do this.
PROTECT
[RAM] ).