Linked Operations With The Tv (Q Link); Safety Precautions - Panasonic SC-RT30 Operating Instructions Manual

Linked operations with the TV (Q Link)

What is Q Link?
Q Link enables you to connect this unit to a Q Link equipped Panasonic TV and perform various linked functions.
The following systems from other manufacturers have similar function to Q Link from Panasonic.
For details, refer to your television's operating instructions or consult your dealer.
≥Q Link (registered trademark of Panasonic)
≥Easy Link (registered trademark of Philips)
≥SMARTLINK (registered trademark of Sony)
Preparation
≥Connect this unit to your TV with a fully wired 21-pin Scart lead (➡ 12–14).
TV/DVD Auto On
DVD Auto Standby
Direct TV Recording
Download from the TV

Safety precautions

Placement
Set the unit up on an even surface away from direct
sunlight, high temperatures, high humidity, and excessive
vibration. These conditions can damage the cabinet and
other components, thereby shortening the unit's service life.
Do not place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can overload
the unit and cause a fire.
Do not use a DC power source. Check the source carefully
when setting the unit up on a ship or other place where DC is
used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not
damaged. Poor connection and lead damage can cause fire
or electric shock. Do not pull, bend, or place heavy items on
the lead.
Grasp the plug firmly when unplugging the lead. Pulling
the AC mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause
electric shock.
When you press the following buttons, linked operations with the TV activate and
corresponding screens appear.
When this unit is on:
Press [1] (PLAY)
[DIRECT NAVIGATOR]
[VIDEO Plusr]
[PROG/CHECK]
[FUNCTIONS]
≥
[DVD-V] [DVD-A] [CD] [VCD] and MP3
The TV is automatically turned on and corresponding screen appear when you insert
the discs.
When you turn the TV off, the unit is turned off as well. However, this
function works in the stop mode [while screen saver (➡ right) is displayed
on the television, this does not work].
This function does not work during the following operations: Channel
reception setting, Auto Clock Setting, Child Lock and Manual Tuning.
You can at once record the same programme that you are watching on the TV.
≥This function allows you to immediately start recording the programme that you are
viewing on the TV without having to change the channels on this unit.
1 Press [DVD] or [AUX] to select the DVD drive or "AUX".
➡
2 Insert the disc ( 24).
3 Press and hold [¥ DIRECT TV REC] for 1 second.
Recording starts.
To stop recording
Press [∫].
]Note]
≥[¥ DIRECT TV REC] will function even when the unit is in standby mode, if the DVD
drive is selected.
≥In the following situations, [¥ DIRECT TV REC] will not function:
–"FM", "AM", or "F MUSICP" is selected as the source.
–A source other than DVD drive is selected while the unit is in standby mode.
As you set TV stations, the station list data is automatically copied from the TV to the
unit, and the TV stations are assigned to the programme positions on the unit in the
same order as on the TV.
≥DATA LOGIC (registered trademark of Metz)
≥Megalogic (registered trademark of Grundig)
When this unit is off (standby mode):
Press [1] (PLAY)
[DIRECT NAVIGATOR]
[VIDEO Plusr]
[PROG/CHECK]
Foreign matter
Do not let metal objects fall inside the unit. This can cause
electric shock or malfunction.
Do not let liquids get into the unit. This can cause electric
shock or malfunction. If this occurs, immediately disconnect
the unit from the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They
contain flammable gases which can ignite if sprayed into the
unit.
Service
Do not attempt to repair this unit by yourself. If sound is
interrupted, indicators fail to light, smoke appears, or any
other problem that is not covered in these instructions
occurs, disconnect the AC mains lead and contact your
dealer or an authorized service center. Electric shock or
damage to the unit can occur if the unit is repaired,
disassembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the
power source if it is not to be used for a long time.
RQT8672
57