Check, Change Or Delete A Programme; Making Timer Recordings On The Television - Panasonic SC-RT30 Operating Instructions Manual

Timer recording
Refer to the control reference on page 26.

Check, change or delete a programme

Even when the unit is in standby mode, you can display the timer recording list by pressing [PROG/CHECK].
Icons
F
Timer recording standby is activated.
[
This programme is currently
recording.
W
The times overlap those in another
programme. Recording of the
programme with the later start time
starts when the earlier programme
finishes recording.
You stopped a weekly or daily timer
recording. The icon disappears the
next time the timer programme starts
recording.
F
The disc was full so the programme
failed to record.
The material was copy-protected so it
was not recorded.
X The programme did not complete
recording because the disc is dirty or
some other reason.
∫ To change a programme
Press [3, 4] to select the programme and press [ENTER]. (➡ 27, Manually programming timer recordings, step 3)
∫ To delete a programme
Press [3, 4] to select the programme and press [¢].
∫ To exit the timer recording list
Press [PROG/CHECK].
Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.

Making timer recordings on the television

(e.g. of digital broadcasts)
To make a timer recording with your television, connect to a television with a Q Link function (➡ 57) that you can use for setting
timer recordings using a fully wired 21-pin Scart lead (➡ 12–14).
1
Make timer programming on the TV.
2
Press [DVD] to select the DVD drive.
3
Turn off the unit.
The start and end of recording is controlled by the TV.
To stop recording
Press [∫].
[Note]
≥ When this unit is in EXT LINK standby ("EXT-L" is shown on the unit's display), recording from TV does not start.
≥ Programmes are recorded as one title on this unit when the end time of the earlier timer recording and the start time of the later
timer recording are close to each other.
[RAM] To divide the titles, go to "Divide Title" (➡ 39).
RQT8672
28
Press [PROG/CHECK].
Timer
Remain 1:58 SP
Recording
12:53:00 15/ 7 TUE
No. Name Date Start Stop Mode
&
01
BBC1 15/ 7 TUE 19:00 20:00 SP
New Timer Programme
Press ENTER to store new programme.
ENTER
RETURN
Message displayed in the "Drive
space" line
OK: Displayed if the recording can
Drive
space
fit in the remaining space.
OK
>
(Date): For recordings made daily or
weekly, the display will show
until when recordings can be
made (up to a maximum of one
month from the present time)
based on the time remaining
on the disc.
! : It may not be possible to record
because:
≥ the disc is write-protected.
≥ there is no more space left.
≥ the number of possible titles
has reached its maximum.