Resetting Channel Setting - Panasonic SC-RT30 Operating Instructions Manual

Resetting channel setting

CH
Numbered
buttons
3,4,2,1
ENTER
A
B
You can add or delete channels, or change programme
positions.
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4] to select "To Others"
and press [ENTER].
3
Press [3, 4] to select "Setup" and
press [ENTER].
4
Press [3, 4] to select "Tuning" and
press [1].
Setup
Manual
Auto-Setup Restart
Download from TV
Tuning
Disc
Picture
Sound
Display
SELECT
TAB
Connection
RETURN
Others
ENTER
5
Press [3, 4] to select "Manual" and
press [ENTER].
Manual Tuning
Pos Name Ch Pos Name
1 BBC1 22 11
2 BBC2 23 12
3 ITV 24 13
4 CH4 25 14
5 CH5 28 15
6 16
7 17
SELECT
8 18
ENTER
9 19
RETURN
10 20
Delete Move
Add
A B C
To delete a programme position
Press [3, 4, 2, 1] to select a programme position and
press [A].
To add a blank programme position
Press [3, 4, 2, 1] to select a programme position and
press [B].
OPEN/CLOSE
FUNCTIONS
RETURN
C
VIDEO Pl +
Ch
To move a TV station to another programme position
1 Press [3, 4, 2, 1] to select a programme position and
press [C].
2 Press [3, 4, 2, 1] to select the new programme
position to which you want to assign the TV station and
press [ENTER].
[Note]
When the unit connected to a Q Link-compatible TV with a
fully wired 21-pin Scart lead sets itself automatically (➡ 18),
only deletion of the programme position can be performed.
To change detailed station settings
After performing steps 1–5
6
Press [3, 4, 2, 1] to select a
programme position and press
[ENTER].
e.g.
Pos 1
Manual
Name BBC1
Tuning
Channel 4
NICAM Auto
Title Page 301
SELECT
RETURN
RETURN : leave
Press [3, 4] to select an item and press [1].
Pos To change the programme position in
which the TV stations are assigned
Press [3, 4] or numbered buttons to select
the number of the desired programme
position and press [ENTER].
Name To enter or change the name of a TV
station
Press [3, 4, 2, 1] to enter station name
and press [ENTER].
If the station name needs a blank space,
select the blank between "Z" and "¢".
Channel To enter newly available TV stations or
change the channel number of an already
tuned TV station
Press [3, 4] or the numbered buttons to
enter the channel number of the desired TV
station.
Wait a few moments until the desired TV
station has been tuned.
After the desired TV station is tuned, press
[ENTER].
NICAM To select the type of sound to be
recorded
Press [3, 4] to select "Auto" and press
[ENTER].
≥ Select "Off" if you want to record the
normal (mono) sound during a stereo,
bilingual or NICAM broadcast, or if the
stereo sound is distorted due to inferior
reception conditions.
Title Page To enter the Teletext title page for a
channel
Entering title page number allows the unit to
automatically record programme and station
names.
Press [3, 4] or numbered buttons to enter
the number and press [ENTER].
≥ To find the correct title page for the station,
refer to its Teletext TV guide.
≥ The unit's clock must be set correctly.
RQT8672
53