Table of Contents
Advertisement
Caution
≥This unit and the supplied speakers are to be used
only as indicated in this setup. Failure to do so may
lead to damage to the amplifier and/or the speakers,
and may result in the risk of fire. Consult a qualified
service person if damage has occurred or if you
experience a sudden change in performance.
≥Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
Speaker installation options
∫ Attaching to a wall
You can attach all of the speakers (except
subwoofer) to a wall.
≥The wall or pillar on which the speakers are to be
attached should be capable of supporting 10 kg
per screw. Consult a qualified building contractor
when attaching the speakers to a wall. Improper
attachment may result in damage to the wall and
speakers.
1 Drive a screw (not included) into the wall.
‰4.0 mm
Wall or pillar
2 Fit the speaker securely onto the screw(s)
with the hole(s).
[[ P T560[ ] Front speaker
[PT860]
Front and surround speakers
Attach to a wall without the
base and the stand
116 mm
384 mm
e.g.
In this position,
the speaker
DO
will likely fall if
NOT
moved to the
left or right.
8
At least 30 mm
‰7.0 mm to
9.4 mm
4.0 mm to 6.0 mm
Center speaker
190 mm
[[ P T560[ ] Surround speaker
Move the
speaker so
that the screw
DO
is in this
position.
Caution
≥Do not touch the front netted area of the speakers.
Hold by the sides.
e.g. Center
DO
speaker
NOT
≥Do not stand on
the base.
Be cautious when
children are near.
∫ Fitting speaker stands
[[ P T560[ ] Center and surround speakers only
[PT860]
Center speaker only
Ensure the stands meet these conditions before
purchasing them.
Note the diameter and length of the screws and the
distance between screws as shown in the diagram.
≥The stands must be able to support over 10 kg.
≥The stands must be stable even if the speakers
are in a high position.
e.g. Center speaker
Metal screw
holes
For attaching to
speaker stands
5.0 mm, pitch 0.8 mm
Plate thickness plus
7.0 mm to 10 mm
∫ Reattaching the speaker cable
Insert the cable from the
bottom.
Leave
about
80 mm
DO
e.g. Front speaker
DO
NOT
(not included)
60 mm
Speaker stand
(not included)
Pull out the cable
through the hole.
Hide quick links:
Advertisement
Table of Contents
