Panasonic SC-RT30 Operating Instructions Manual page 13

B Connecting to a television and Satellite/Digital terrestrial receiver
Using a fully wired 21-pin Scart lead
≥ You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (➡ 57).
≥ You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
[Required[setting]
"AV1 Output" and "AV2 Input" in the Setup menu (➡ 51)
To the
aerial
RF coaxial lead
(included, grey)
1
RF coaxial lead
(included, black)
2
To view satellite/digital terrestrial programmes
Press [INPUT] to select the input channel "AV2" or put this unit in standby mode.
To record satellite/digital terrestrial programmes
Refer to "Recording from a satellite/digital terrestrial receiver" (➡ 29).
Connecting a terminal other than the 21-pin Scart terminal (➡ 15).
Television's rear panel
VHF/UHF
AV
RF IN
RF coaxial lead
(included, black)
3
AV1
(TV)
AV2
(EXT)
Fully wired 21-pin Scart lead (For External Link function)
(not included)
5
AV OUT
RF
OUT
RF
IN
Satellite/Digital
terrestrial receiver's
rear panel
4
Fully wired 21-pin Scart lead
(not included)
§ This connection will enable you
Back of this unit
§
(For Q Link functions)
to play audio from your
3
television through your home
theater system. Refer to
"Enjoying TV broadcast with
this unit's speakers" (➡ 56).
RQT8672
13