Panasonic SC-RT30 Operating Instructions Manual page 51

Recordable dvd home theater system
Table of Contents

Advertisement

Tabs
Picture Comb Filter
Select the picture sharpness when recording.
The setting is fixed with "On" if you set "TV System" to
"NTSC" (➡ below).
Still Mode
Select the type of picture shown when you pause play
(➡ 65, Frames and fields).
Sound Dynamic Range Compression
only)
Change the dynamic range for late night viewing.
Bilingual Audio Selection
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Select whether to record the main or secondary audio
type when recording to a disc.
Audio Mode for DV Input
You can select the kind of audio when recording from
the unit's DV IN terminal (➡ 42).
Speaker (➡ 52)
Adjust the speaker level or set the delay time for your
center and surround speakers.
Display On-Screen Messages
Choose whether to show status messages
automatically.
Grey Background
Select "Off" if you do not want to have the unit show the
grey background when tuner reception is weak.
FL Display
Changes the brightness of the unit's display.
Connec-
TV Aspect (➡ 20)
tion
Progressive (➡ 20)
This setting is fixed with "Off" if you set "AV1 Output" to
"RGB 1 (without component)" or "RGB 2 (without
component)" (➡ below).
TV System (➡ 54)
AV1 Output
Selects the output from the AV1 terminal.
Select "RGB 1 (without component)" or "RGB 2
(without component)" for RGB output.
Select "Video (with component)" or "S Video (with
component)" for component output (progressive
output).
Set according to the signal and terminal of the
connected TV.
AV2 Settings
Set to match the connected equipment.
≥ Press [ENTER] to show the following settings.
AV2 Input
This setting is according to the output signal of the
connected equipment.
Ext Link
This setting cannot be made when the "TV System"
is set to "NTSC" (➡ above).
Menus
≥ On: Select it to record clear picture.
≥ [Off]:Normally, use this setting.
≥ [Automatic]
≥ Field: Select if jittering occurs when "Automatic" is selected.
≥ Frame:Select if small text or fine patterns cannot be seen
≥ On
[DVD-V]
(Dolby Digital
≥ [Off]
≥ [M\1]
≥ M 2
You cannot select this when recording from an external source
(except from DV equipment connected to this unit's DV IN
terminal). Select the audio on the other equipment.
≥ [Stereo\1]:Records audio (L1, R1).
≥ Stereo 2:Records added audio such as narration (L2, R2)
≥ Mix:
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
When recording bilingual broadcast, select the type of audio in
advance from "Bilingual Audio Selection" (➡ above).
≥ [Automatic]
≥ Off
Options (Boxed items are the factory presets.)
(The picture is coarser.)
clearly when "Automatic" is selected. (The picture is
clearer and finer.)
subsequent to original recording.
Records both Stereo 1 and Stereo 2.
Delay time
≥Center: [0.0]/1.0/2.0/3.0/4.0/5.0 ms
≥Surround (L/R): 0.0/[5.0]/10.0/15.0 ms
Speaker level
≥Center: –6 dB to +6 dB (Factory preset: 0 dB)
≥Surround (L/R): –6 dB to +6 dB (Factory preset: 0 dB)
≥ [On]
≥ Off
≥ [Bright]
≥ Dim:
[16\\9]
≥4:3
:
≥ On
≥[Off]
≥ [PAL]
≥NTSC
≥ Video (with component):
Select when a TV is connected that can receive a composite signal.
≥ S Video (with component):
Select when a TV is connected that can receive an S Video signal.
≥ RGB 1 (without component):
Select when you have connected a TV that can receive RGB
signals.
Select this mode so the TV automatically switches to display
the picture from the unit when you turn the unit on.
[RGB\2\\without\component\]
(
)
Select when you have connected a TV that can receive RGB
signals. If you would like to switch to display the picture from the
unit only when playback or viewing menus, select this mode.
≥ [Video]
≥ S Video
≥ [Ext\Link\1]:
When a satellite/digital terrestrial receiver (SKY Digital STB
etc.) which transmits a special control signal recordings via
the 21-pin Scart lead is connected.
Start and stop timings of recording are controlled by the
control signal (SKY Digital STB/digital terrestrial receiver
using the "SKY Personal Planner" function).
≥ Ext Link 2:
When external equipment with a timer function is connected.
When it turns on, recording starts.
When it turns off, recording stops.
≥Letterbox
:
RQT8672
51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-rt70

Table of Contents