Timer Recording; Using Video Plusr System To Make Timer Recordings - Panasonic SC-RT30 Operating Instructions Manual

Timer recording

DVD
Numbered
buttons
¢
∫
A
REC MODE
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
See also the notes "Important notes for recording"
(➡ 22).
Preparation
≥ Turn on the television and select the appropriate video
input to suit the connections to this unit.
≥ Press [THEATER] to switch the remote control to operate
this unit.
≥ Press [DVD] to select the DVD drive.
≥ Check the time on the unit is correct.
≥ Insert a disc (➡ 24).
Using VIDEO Plusr system to make
timer recordings
Entering PlusCode number is an easy way of timer
recording. You can find these numbers in TV listings in
newspapers or magazines.
≥ Using PlusCode numbers for Satellite stations
Set this unit to recognise PlusCode numbers for Satellite
stations before you start the following operations (➡ 19,
Timer recording from satellite receiver with VIDEO Plus+
system).
≥ You can enter up to 16 programmes up to a month in advance.
1
Press [VIDEO Plusr].
VIDEO Plus+
Remain
Record
Input PlusCode Number 0-9, and press ENTER.
RQT8672
ENTER
26
RETURN
THEATER
PROG/CHECK
3,4,2,1
ENTER
VIDEO Plus +
VIDEO Plusi
1:58 SP
12:53:00 15/ 7 TUE
--
0 9 Number
2
Press the numbered buttons to enter
the PlusCode number.
≥ To correct the number
Press [2] to move back to correct a digit.
3
Press [ENTER].
Timer
Remain 1:58 SP
Recording
12:53:00 15/ 7 TUE
Name Name Date Start Stop Mode
BBC1 15/ 7 TUE 16:00 17:00 SP
Programme Name
≥ Confirm the programme and make corrections if
necessary using [3, 4, 2, 1] (➡ 27, Manually
programming timer recordings, step 3).
≥ When "—" appears in the "Name" column, you cannot
set timer recording. Press [3, 4] to select desired
programme position. After you have entered the
information of a TV station, it is kept in the unit's memory.
≥ You can also press [REC MODE] to change the
recording mode.
≥ To enter programme name
Press [2, 1] to select "Programme Name" and
press [ENTER]. (➡ 43)
4
Press [ENTER].
The settings are stored and the programme goes to
timer recording standby.
The timer icon is displayed in left column.
Timer
Recording
No.
F
Timer icon
01
"F" lights on the unit's display to indicate timer
recording standby has been activated.
No. Name Date Start Stop Mode
F
01 BBC1 15/ 7 TUE 19:00 20:00
New Timer Programme
Repeat steps 1–4 to programme other recordings.
∫ To cancel recording when recording has already
begun (➡ 27)
∫ Notes on timer recording (➡ 27)
To exit the timer recording list
Press [PROG/CHECK].
Name Date S
BBC1 15/ 7 TUE 19
New Timer
Drive
space
When "!" appears,
SP OK
make sure the disc
has a sufficient
space.