Step 4 Radio And Ac Mains Lead Connections - Panasonic SC-RT30 Operating Instructions Manual

4
STEP
Included parts to be used
AM loop aerial
1
Connect the aerials.
White
Red
Loosen the terminal with a
Phillips-head screwdriver.
2
Connect the AC mains lead.
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 2 BEFORE CONNECTION.
Back of this unit
RQT8672
16
Radio and AC mains lead connections
FM indoor
aerial
Push up.
Insert the
aerial cables
fully.
Black
4
5
Tighten the
terminal screw
again.
To household mains socket
(AC 230 to 240 V, 50 Hz)
AC mains lead (included)
AC IN terminal
AC mains lead
AM loop aerial
Stand the aerial up on its base.
Place the aerial where reception is
best.
Keep loose aerial cable away from
other wires and cables.
Click!
FM indoor aerial
Affix this end of the aerial where reception is best.
Use FM outdoor aerial if radio reception is poor (➡ 47).
Adhesive tape
Back of this unit
Conserving power
This unit consumes a small amount of power, even
when it is turned off. To save power when the unit is
not to be used for a long time, unplug it from the
household mains socket.
Set the unit to standby mode and remove the AC
mains lead after "BYE" disappears from the
unit's display.
≥You will need to reset some memory items in the
unit after plugging.
[Note]
The included AC mains lead is for use with this
unit only. Do not use it with other equipment.
Also, do not use cords for other equipment with
this unit.