Speaker Installation Options - Panasonic SC-RT50 Operating Instructions Manual

Recordable dvd home theater system
Hide thumbs Also See for SC-RT50:
Table of Contents

Advertisement

Other settings and optional speaker installation

Speaker installation options

Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
 The wall or pillar on which the speakers are to be attached
should be capable of supporting more than 15 kg (33 lbs) for the
front speaker and more than 10 kg (22 lbs) for the surround or
the center speaker. Consult a qualifi ed building contractor when
attaching the speakers to a wall. Improper attachment may result
in damage to the wall and speakers.
 When mounting the front speakers to a wall, we recommend
using a string (not included) to prevent it from falling (
Preparation for front speakers
1
Pull down the longer part
of the cable, and then pull
the speaker cable out from the stand.
2
Feed the speaker cable into
the bottom of the speaker and
through the slot at the rear.
3
Connect the speaker cable.
(
page 3)
Drive a screw (not included) into the wall.
4.0 mm (
)
5
/
32
5.0 to 7.0 mm
(
3
/
Wall or pillar
Fit the speaker securely onto the screw(s)
with the hole(s).
255 mm
)
1
(10
/
16
320 mm
)
(12
19
/
32
e.g.
In this position,
the speaker
will likely fall if
moved to the
left or right.
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way Secaucus, New Jersey 07094
http://www.panasonic.com
 2006 Matsushita Electric Industrial Co., Ltd.
Printed in Malaysia
page 3).
7.0 to 9.4 mm
 to
)
(
9
/
3
/
32
8
to
)
9
/
16
32
190 mm
)
(7
15
/
32
Move the
speaker so
that the screw
is in this
position.
Note
Reattaching the cable to the stand
1 Remove the two screws from
the stand, and remove the
metal cover.
2 Pull the cable out about 40
) from the hole in
cm (15
3
/
4
the metal cover, and insert
to the plastic cover.
3 Insert the metal cover so it
does not disturb the cable
and close tightly with the
two screws.
Fitting speaker stands (not included)
(Except front speakers)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance
between screws as shown in the diagram.
 The stands must be able to support over 10 kg (22 lbs).
 The stands must be stable even if the speakers are in a high
position.
e.g. Center speaker
Attach the stands
to these metal
screw holes.
5 mm (
), pitch 0.8 mm (
3
/
16
Plate thickness plus
7 mm to 10 mm
 to
)
(plus
9
/
13
/
32
32
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
Screws
Metal cover
Plastic cover
Approx. 40 cm
Plastic cover
)
(15
3
/
4
)
1
/
32
)
3
60 mm (2
/
8
Speaker stand
(not included)
RQT8656-P
F0206TS0

Advertisement

Table of Contents
loading

Table of Contents