Table of Contents
Advertisement
Speaker installation options
∫ Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to be attached
should be capable of supporting over 10 kg per screw. Consult a
qualified building contractor when attaching the speakers to a
wall. Improper attachment may result in damage to the wall and
speakers.
≥ When mounting the front speakers or surround speakers ([HT540]
front speakers only) to a wall, we recommend using a string (not
included) to prevent it from falling.
[HT540] 2 Screws
[HT990]
4 Screws
Preparation for front speakers and surround speakers
([HT540] front speakers only)
1
Remove the speaker cable from the stand.
2
Connect the cable (➜ page 7).
1 Attach the cover plate to the front speaker or surround speaker
([HT540] front speaker only).
1
Cover plate
2 Drive a screw (not included) into the wall.
‰4.0 mm
Wall or pillar
8
[HT540] 2 Cover plates
[HT990]
4 Cover plates
Release the cable
from the groove.
2
Screw
Tighten securely.
‰7.5 to 9.5 mm
5.0 to 7.0 mm
3 Fit the speaker securely onto the screw(s) with the hole(s).
Front speaker [HT540]
Front and surround speakers
106 mm
340 mm
e.g.
In this position, the
speaker will likely
fall if moved to the
left or right.
Reattaching the speaker cable to the stand
1
Remove the eight screws from the stand, and remove the speaker net.
Screw
2
Position the cable.
Approx. 15 cm
Press the cable
into the groove.
3
Attach the speaker net with the screws.
∫ Fitting speaker stands
[Except front speakers ([HT540] [HT990]) and surround speakers
([HT990])]
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance
between screws as shown in the diagram.
≥ The stands must be able to support over 10 kg.
≥ The stands must be stable even if the speakers are in a high
position.
e.g. Center speaker
Metal screw holes
For attaching to
speaker stands
5 mm, pitch 0.8 mm
Plate thickness plus
7 mm to 10 mm
Center speaker
[HT990]
200 mm
Surround speaker [HT540]
Move the speaker
so that the screw is
in this position.
Cable
(not included)
60 mm
Speaker stand
(not included)
Hide quick links:
Advertisement
Table of Contents
